Monitors
Medical Monitors
Displays engineered for clinical environments — readable at an angle in low light, operable through gloves, cleanable on every shift, and supported across the full life of your device program.
Precision and Reliability Where It Matters Most
A monitor in a clinical setting works under conditions no office display is specified for. It sits in low and diffused light. It is read at an angle by several people at once. It is touched by gloved hands, exposed to smears and spatters, and wiped down with disinfectant between patients. And it has to keep doing all of that for years without the configuration changing underneath your device.
US Micro Products supports medical programs with display selection, engineering review, and supply coordination for surgical, diagnostic, portable, and clinical applications. We specify the panel, touch stack, cover glass, and interface around how the monitor will actually be used, then manage availability so the part you qualified stays buildable through the life of the product.
Where the display is built into your own housing rather than supplied as a finished monitor, an open frame monitor or a fully custom display is usually the better starting point. For the wider clinical picture, see our medical display solutions.
Built to Be Cleaned
Clinical surfaces are wiped down constantly. Ethanol agent-durable cover glass and sealed touch surfaces hold up to repeated cleaning without hazing or failing.
Continuous Duty
Designed for at least three years of continuous use with 50K hours of backlight life, because a monitor at a bedside or in a theatre is rarely switched off.
Long Program Life
Medical device lifecycles run 7 to 15+ years. We manage availability and obsolescence so the configuration you qualified stays buildable.
How We Configure a Medical Monitor
Each decision below is made against the room the monitor lives in — the lighting, the cleaning protocol, and who needs to see the screen.
Resolution & Screen Size
Resolution options from 2M to 5M pixels for diagnostic imaging, surgical visualization, and PACS review, sized around viewing distance and the detail clinicians need on screen.
Viewing Angle
IPS panels with a minimum of 80 degrees viewability in each direction, so multiple clinicians around an operating table see the same image without color shift.
Brightness & Contrast
Brightness customized from 250 nits to 500 nits or higher, with contrast ratios from 600:1 to 1000:1 to resolve fine detail in low and diffused-light rooms.
Color Depth
10-bit to 12-bit color according to your system configuration, for accurate rendering of diagnostic images and surgical camera feeds.
Touch & Cover Glass
PCAP touch that responds through latex gloves and with fluids on the screen, with AG/AR coated, ethanol agent-durable cover glass and optical bonding.
Interface & Mounting
DVI and DisplayPort interfaces customized to your system architecture, with cart, arm, wall, and VESA mounting for the position the monitor works in.
Where Medical Monitors Are Used
Every clinical setting puts a different demand on the display — ambient light, cleaning frequency, viewing distance, or how often the monitor is moved.
Patient Monitoring
Bedside and transport monitors where vital-sign traces must stay legible from across the room and at an angle.
Surgical Visualization
Theatre displays for endoscopic and surgical camera feeds, viewed by a full team in low, diffused light.
Diagnostic Imaging
Ultrasound, radiology, and PACS review positions that depend on resolution, contrast, and consistent color.
Point of Care
Cart-mounted and portable carts where the monitor is moved, cleaned, and handled through every shift.
Laboratory & Analytics
Bench instruments and analyzers that need a readable, serviceable operator display over a long product life.
Dental & Veterinary
Chairside and clinic displays where cleaning protocols and gloved operation shape the touch and glass choice.
Quality and Regulatory Support
US Micro Products is a display component supplier, not a medical device manufacturer. Our quality processes are built to support our medical device customers' own regulatory requirements.
ISO 9001:2015 Certified
Our quality management system is ISO 9001:2015 certified, covering design, sourcing, manufacturing oversight, inspection, testing, and delivery.
Design Documentation
Complete material specifications, test reports, and traceability records compatible with FDA Design Controls (21 CFR 820).
Component Traceability
Full lot traceability from raw materials through finished display assembly, supporting your device history records.
Change Notification
Formal notification for any material, process, or supplier change that could affect form, fit, or function.
Related Products
Open Frame Monitors
Panel-and-frame monitors built into medical enclosures, carts, and instrument housings.
Touch Panels
PCAP touch with glove mode and custom cover glass for surgical and clinical interaction.
Desktop Monitors
Fully enclosed monitors with stand or VESA mounting for workstations and review positions.
Medical Monitor FAQs
Specifying a Monitor for a Medical Device?
Tell us the clinical environment, cleaning protocol, touch requirement, and program life you are planning for. Our engineers will confirm the configuration and the lifecycle support behind it.
Request a Quote